Orbegozo TEM 8000 Manual De Instrucciones página 12

TEM 8000
OPERATION
a). Input the battery
b). Waiting for 10 minutes for the first time or just insert the battery
c). In case when it's not used for long time, it will detectthe environment temperature first so it will
take one or two seconds more to switch on.
d). Focus on the forehead and keep 1-3cm distance then press the button to start testing. It will
display the testing data within one second. Be sure there is no hair, sweat, cosmetic or hat to cover
the forehead.
SETTING
Keep pressing" MODE" for 3 seconds till the screen display F1, the press" ▼ "to choose ℃ and" ▲
a). Setting the format of the temperatura F1
"for ℉
1. Body temperature mode
3.Result
2.Surface temperature mode
4.Alarm signal
5.Temperature℃ /℉
6.Low battery warning
7.Storage
8.Checking saved data
1. Infrared probe
2. LCD screen
3. Mode
4. Down
5. Up
6. Backlight switch
7. Testing key
8. Battery cover
12