Preliminary Recommendations - WEG Cassia X1000 Manual General De Instalación Y Operación

3 PRELIMINARY RECOMMENDATIONS

This manual contains the necessary information for the correct installation, setup and use of the Cassia X1000
gateway with the WEG Motor Scan sensor (smart monitoring device for motor characteristics).
It was developed to be used by people with proper technical training or qualification to operate this kind of equipment.
Failure to comply with the product instructions may cause operating accidents, damages to the environment, to
the device, in addition to voiding the warranty.
The user is responsible for the correct definition of the installation environment and application characteristics.
During the warranty period of Gateway X100, all repair, overhaul and reclamation services must be carried out by
WEG authorized Service Centers to maintain validity of the warranty.
NOTE!
Follow the installation instructions described in
on page 6, Chapter 4 CERTIFICATIONS AND REGULATIONS on page 9
SETTINGS on page
NOTE!
Read the whole manual before installing or operating the Gateway.
DANGER!
Only qualified people familiar with the Gateway should plan or execute the installation, operation and
maintenance of this device.
Such personnel must follow the safety instructions described in this guide and/or defined by local
regulations.
Failure to comply with the safety instructions may lead to death and/or damages to the Gateway.
11.
Preliminary Recommendations
Chapter 3 PRELIMINARY RECOMMENDATIONS
and Chapter 5
Gateway Cassia X1000 | 6