Dyna-Glo DGPH901ATBR Instrucciones De Ensamblaje página 6

ASSEMBLY INSTRUCTIONS
Re-assembly if you have just disassembled
the unit:
Note: If this is a new unit, please see the
instruction manual included with the patio heater
to complete assembly.
6. Insert the reflector and head assembly into the
post and assemble them with the four stainless
steel M6x10mm bolts previously removed.
7. To secure the unit, please use 3 nails M8X100
(not included) to nail the unit to the ground.
6
Reflector &
Head Assembly
Stainless Steel
M6x10mm Bolts
Post
7
6