Assembly - Husky HOLC7218BB1MYS Guía De Uso Y Mantenimiento

Assembly

1
Attaching the side handle
□ Attach the side handle (B) to the cabinet using four bolts
(BB).
□
Tighten all bolts with the 10 mm wrench (CC).
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
3
Attaching the power strip brackets
□ Attach the power strip brackets (H) to the cabinet using four
bolts (AA).
□
Tighten all bolts using a screwdriver.
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
B
BB
□
H
AA
2
Installing the crank handle or crank cap
□
Install the crank handle (K) or crank cap (L) into the shaft
next to the Husky badge.
NOTE:
CC
drawers when not in use.
4
Installing the drawer liners
□ Place the drawer liners (M) in appropriately-sized
drawers to protect the surface.
M
6 6
K
Store the crank handle (K) or crank cap (L) in one of the
L