Extend
the wand to its full length. Turn the
locking
ring to the LOCK
position.
Attach
the wand
onto the open end of the hose.
Lower_-_
_
Suction
Wand _'_r_
Control Slide
f
\
_._<_
Locking Ring
I
_Unlock
_,_
Upper
Wand
Align
the tabs on the wand with the "J"
slots in the hose.
Push the wand into the
hose and twist to the right to lock.
Raised
Tab
Suction
Telescopic
l
Wand
Tool
To achieve
maximum
reach
with the
attachments,
add the crevice
tool to the
end of the wand by inserting
and twisting
slightly.
The combination
brush
can be attached
directly
to the wand.
b
Brush_
......
Combination
_
_
Brush
BrushS
Holder
Use the brush
holder without
the brush
for
greater
suction
on furniture
cushions
or
stairs. Use brush
holder
with brush
for
cleaning
loose surfaces
such as drapes.
TO OPERATE
SUCTION
CONTROL
SLIDE
Telescopic Wand
When
using attachments
for cleaning
draperies,
small
rugs with low pile and
other delicate
items, twist the suction
con-
trol slide to the open
position.
This slide is
located
on the telescopic
wand, close
to
the hose.
Suction
Control This will reduce
suction
for ease of
cleaning.
10
Note:
Return
suction
control
slide to the
closed
position
for normal
cleaning.
CAUTION
When using attachments,
be careful
not to overextend
the stretch
hose
when reaching. Trying to reach beyond
the hose stretch
capability
could cause
the vacuum
cleaner
to tip over.
TO STORE ATTACHMENTS
Remove the combination
brush. Snap into
appropriate
storage location.
Remove crevice tool from the wand by twist-
ing. Lay aside.
Remove the telescopic
wand from the hose.
Twist the wand to the left and pull from the
hose end.
Unlock the wand by turning
the wand lock-
mg ring to the UNLOCK
position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
3osition.
Place the crevice tool down into the com-
3ressed wand. Place the telescopic
wand in
the wand holder
CAUTION
DO NOT pull the vacuum
cleaner
around
the room by the hose.
Property
damage
or personal
injury could result.