Combination
Brush
Handle
Extension
Release
Lever
..... C revice
Tool
TO USE ATTACHMENTS
Place the carpet/bare
floor selector
in the
bare floor setting
by rotating the selector
back and down to the bare floor setting.
See CARPET/BARE
FLOOR SELECTOR
section.
Remove the lower end of the extension
hose from the wand holder by grasping
the
hose collar, twisting,
and pulling straight up.
Rotate the extension
hose release lever
down if maximum
reach is needed.
IbWARNING
Electrical
Shock
And
Personal
Injury
Hazard
Disconnect electrical supply before ser-
vicing or cleaning the unit. Failure to do
so could result in electrical shock or
personal injury from vacuum cleaner
suddenly starting,
TELESCOPIC WAND WITH
SUCTION CONTROL SLIDE
1. Remove
the lower end of the extension
hose from the wand holder by grasping
the hose collar, twisting,
and pulling
straight up.
2. Remove the telescopic wand from the
wand holder.
3. Remove the crevice tool from its stor-
age position in the wand. Turn the lock-
ing ring to the UNLOCK
position.
1. Crevice
Tool
2. Telescopic
3. Hose
Collar
Wand