Cleaning & Maintenance - Wilfa WSPL-3B Manual De Instrucciones

Ocultar thumbs Ver también para WSPL-3B:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 126
• By setting the flow control to the right, it will act as a drip stop.
TIPS
• Rinse the coffee filter in water to remove any unwanted taste prior to brewing.
• Always use fresh coffee. You will obtain the best results if the coffee you use
is freshly ground. Grounded coffee loose many of its aromas just after a few
minutes and by grinding the coffee yourself just before you brew, you keep all
the good aromas for the best coffee taste.
• You can use one of Wilfa's coffee grinders suitable for grinding filter coffee.
Using dif-ferent degrees of grinding will affect the coffee's strength and taste.
• The enclosed filter holder has a manual drip stop. Wilfa does not recommend
serving coffee before the filter process is completed, since this will diminish
the final coffee result.
• If even hotter coffee is desired, the glass jug should be rinsed with hot water
prior to brewing. This is especially recommended if you are making 0.5 litres
of coffee or less.
• If the coffee maker has not been used for a while it is recommended to run
clean water through the unit prior to use.
• Coffee residue will always stay on parts in contact with the coffee. For optimal
coffee taste, you should clean the filter holder, jug and jug lid regularly.
• Do not use the coffee jug to fill the water tank with fresh water as coffee
residues will influence on the quality of the brewed coffee.
CLEANING INDICATOR
The light on the start button will slowly pulsate when you start the 180th brewing
process. The coffee machine indicates that it is time for cleaning, and you should
then clean the unit. The button will pulsate for three brewing cycles before the
counter automatically resets.
CLEANING & MAINTENANCE
CLEANING
• Use a cleaning product, like Clean drop or other detergents intended for
cleaning coffee makers. Remember to brew through with clean water after the
cleaning process.
• If necessary, the device may be cleaned with a damp cloth without any
additives.
• Filter holder, coffee jug and lid can be washed in hot soapy water or placed at
the top in the dishwasher.
COFFE BREWER · WSPL-3B
9
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido