Publicidad
Idiomas disponibles
Idiomas disponibles
4. Meaning of elements, located on the power distribution unit (PDU)
1.
VDE cable with IEC C14 plug (models with the IEC indication in the product name) or with Uni-Schuko plug, at the end of cable.
2.
Mounting brackets intended for fixing the strip in the ICT server rack / 19" / 10" rack.
3.
Power switch with overload protection. If the switch is tilted to the „OFF" position, it means that the power strip is turned on. If it is toggled
the other way, it means that the protection has been activated and the strip is switched off.
4.
Power switch. If the side of the switch with the white circle icon is tilted upwards, it means that the strip is turned off. If this half is tilted
the opposite way, it means that the strip is turned on.
5.
Surge protection LED. If the LED is green, the protection has been activated.
6.
Surge protection LEDs with active filter. If the 3 LEDs are actively, the protection is active.
7.
Schuko socket.
8.
French socket.
9.
IEC C19 socket.
10. IEC C13 socket.
11. Uni-Schuko plug of the input cable (only models without IEC indication in the name).
12. IEC C14 plug of the input cable (only models with IEC indication in the name).
13. IEC C20 plug of the input cable (only models with C20 indication in the name).
The electric path is follows: L (phase wire) – red, N (neutral wire) – blue, G (ground wire) – yellow.
1
3
11
5
4
12
Lanberg © 2015-2021
2
6
7
8
13
9
10
Publicidad
