English
Note:
Some devices, such as an iphone, connect immediately after pairing, some may take
1.
longer to connect.
The unit can only be connected and playing content from one device at a time.
2.
To connect to a different paired device, you have to turn off bluetooth or unpair
3.
from the currently paired device and manually connect to the other device.
RADIO OPERATION
Basic information for FM radio operation
Please make sure that the aerial on the back of the radio is fully extended and
1.
adjusted before you attempt to tune to an FM station (a vertical position is
recommended). This will ensure that the maximum signal strength is available
when the radio begins to scan.
Extending the aerial also ensures the best possible sound quality.
2.
The range of FM frequency is from 87.50MHz to 108.00MHz.
3.
Press the FM button to enter FM (Tuner) mode.
4.
Press the MO/ST button to turn STEREO ON or OFF if there is strong stereo
5.
signal.
(Press L/R button on the front panel can also turn stereo on.)
Selecting stations
Press NUMBER buttons to select stations. E.g. press 1, then 5 to select 15th
1.
station.
Press CH+/- buttons to turn to skip to the previous or next station.
2.
Press F button on remote control to choose frequency. E.g. first press F button,
3.
then press 9, 9, 7, 0 to select the frequency 99.70MHz.
Station searching/tuning
For automatic searching:
1.
Press the SEARCH button, the unit starts to search stations from low to high
frequency automatically. The searched stations are saved automatically. Press again
to stop.
(Up to 60 stations can be saved at a time.)
For manual tuning:
2.
Press TUNE+/- briefly to adjust the frequency in increment of 0.05MHz.
a.
Press and hold TUNE+/- buttons to tune the next or previous frequency with
b.
sufficient reception, once an available frequency is found, it will stop tuning.
GB-12
Save Stations
To save the current frequency to the current station:
1.
E.g. If you are listening to the 88.90MHz in the 5th station, press the SAVE
button directly and the 88.9MHz is saved to the 5th station.
To save a special station:
2.
E.g. If you want to save 99.70MHz to the 15th station, first press CH+/- buttons
or press Number buttons 1, 5 to select the 15th station; then press F button, to
enter frequency interface, input the number 9, 9, 7, 0, at last press SAVE button to
save the station.
RDS mode
In FM mode, press the RDS button on the remote control to switch to RDS radio
mode. If there is RDS signal surrounding, you will get the information of the below
items:
PS: Program service name
1.
PTY: Program type
2.
CT: Clock time and date
3.
RT: Radio text
4.
TROUBLESHOOTING
For your convenience, we have listed some methods to solve common problems you
may encounter when you use the system. If the problem occurs repeatedly, contact the
nearest maintenance center.
Problem
Possible cause
Power supply does not
Power plug is not fully
work
inserted into the power
socket
Remote control does not
The batteries have been
work
used up
The remote control is not
aimed at the remote
control sensor
English
Solution
Fully insert the power
plug into the power socket
Replace them with new
ones
Please aim the remote
control correctly; in line
with the remote sensor
GB-13