Publicidad
Enlaces rápidos
15
CAUTION: Carefully read instructions and procedures for safe operation. DO NOT USE if this product
should become damaged and/or components are broken, Check this product for damaged hardware,
loose joints, loose bolts or other fasteners, missing parts or sharp edges before and after assembly.
Assembly of this product will require two people.
ADVERTENCIA – Por seguridad, Lea completamente las instrucciones antes del ensamblaje y uso.
Inspeccioné su producto por piezas dañadas, faltantes o sueltas, bordes filosos o astillas antes, durante
y después del uso. NO UTILIZAR este producto en caso de piezas faltantes o dañadas. El ensamblaje
requiere dos personas.
AVERTISSEMENT: Lisez toutes les instructions avant de monter le lit de bébé. Avant d'utiliser ou de
monter le lit de bébé, inspectez-le pour vous assurer qu'il n'y a pas de pièces endommagées,
d'articulations desserrées, de pièces manquantes ou de bords tranchants. N'utilisez pas le lit de bébé si
certaines pièces sont manquantes ou brisées. L'assemblage de ce produit nécessite deux personnes.
Please store this manual in the plastic pouch for future reference.
Guardar estas instrucciones en su sobre plástico para referencias futuras.
Veuillez gardez ces instruction dans la pochette plastique pour future références.
Arlington Convertible Crib
Model Number
04550-01
-FT
COLOR
ID730A
Nov 2015
Publicidad
Manuales relacionados para Graco Arlington 04550-01
Resumen de contenidos para Graco Arlington 04550-01
- Página 1 Model Number 04550-01 COLOR Arlington Convertible Crib CAUTION: Carefully read instructions and procedures for safe operation. DO NOT USE if this product should become damaged and/or components are broken, Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp edges before and after assembly. Assembly of this product will require two people.
- Página 2 Attention Customers living in the United States and Canada If you are missing parts, hardware, or if your product has been damaged during shipping, DO NOT RETURN YOUR PRODUCT The store does not stock parts and may not be able to help you. Contact Stork Craft directly and we will ship you the parts you need to your shipping address at no cost to you.We have three convenient ways for you to reach us: •...
- Página 3 WARNING Failure to follow these warnings and the assembly instructions could result in serious injury or death. Read All Instructions Before Assembling The Crib. Keep Instructions For Future Use. Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant. The mattress used in this crib should not be more than 6 inches (15cm.) thick and should be of such length and width that the gap between the mattress and the sides of the crib is not more than 1-3/16 inches (3cm.) when the mattress is pushed into the corner of the crib.
- Página 4 DISTRIBUTED BY/ DISTRIBUE PAR: Stork Craft Mfg. (USA), Inc., 3993 Howard Hughes Parkway, Unit#250 Las Vegas, NV, USA.89169 Twitter @Storkcraft PAGE 4...
- Página 5 ADVERTENCIA De no seguir correctamente estas instrucciones y advertencias podría resultar en accidentes graves e incluso la muerte. Lea completamente las instrucciones antes de armar la cuna, guardar las instrucciones para su uso posterior. Los bebe pueden sufocarse con la ropa de cama. Nunca añadir almohadas, relleno debajo del niño, o edredóno. El colchón para esta cuna no debe exceder 6”...
-
Página 6: Identifying The Parts
Identifying The Parts Right panel back post Back panel Right panel Right panel front post Front panel Left panel back post Mattress support Left panel Stretcher Left panel front post BOLTS Post Decoration 1/4” x 3/4” Post Decoration 1 PC 1 PC 12 PCS Wooden Dowel... - Página 7 Thank you for purchasing Graco product. Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all parts and compare with parts list. Insert two wooden dowels (X) into the posts (C1/C2) as diagram.Attach back panel posts (C1/C2) to back panel (C) with 1/4”...
- Página 8 Attach the left and right panels (A&B) to back panel (C) using four 1/4” x 2-1/4” bolts (3) with four barrel nuts. Use Allen key to tighten bolts. Assemble mattress base in the highest position for a newborn. When the baby grows, the mattress support should be lowered to prevent baby from climbing out.
- Página 9 WARNING Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment or strangulation. !DO NOT place bed near windows where cord from blinds or drapes may strangle a child. !Guardrail provided must be used when using crib as a toddler bed or day bed. !Child must be at least 15 months old and not more than 50 lbs.
- Página 10 Full Size Bed with Headboard Assembly FULL SIZE CONVERSION RAILS ARE NOT INCLUDED. THEY HAVE TO BE PURCHASED SEPARATELY. BED RAILS MAY DIFFER FROM ILLUSTRATION. STEP 1. Unscrew left and right panels (A & B).Remove the mattress support (E). Make sure the back posts are still attached to the back panel ( C) using the 1/4”...
-
Página 11: Un Año De Garantía Limitada
DO NOT remove any part that is attached with wood screws,The stationary side rail, mattress base can all be disassembled for storage. Simply review the assembly instructions for each and reverse the order to disassemble. Wipe all parts with a dampened clean cloth. DO NOT use abrasives. To convert to a double bed please follow the instructions in the double bed kit.