VENOM VS2732 Manual De Usuario página 7

ENGLISH
Twin Docking Station
For use with PS4™
Product: VS2732/37/38/39
User Guide
Contents:
1 x Twin Docking Station
2 x Micro USB Charging Dongles
Installation & Use
1. Carefully insert the Micro USB Charging Dongle
into the micro USB port on the top of your
DUALSHOCK®4 wireless controller, ensuring it
pushes fully into place.
2. Insert the USB connector from your Twin Docking
Station into any spare port on your PlayStation®4
system.
3. Insert your DUALSHOCK®4 wireless controller,
facing forward, into the Twin Docking Station
ensuring it clicks into place.
4. Then turn on your PlayStation®4 system.
5. When charging, the LED light will glow red, once
fully charged it will glow blue.
6. Once fully charged you can remove your
DUALSHOCK®4 wireless controller from the Twin
Docking Station.
To charge your DUALSHOCK®4 Wireless Controller
whilst your PS4™ system is in Standby Mode
1. From the PS4™ home screen select "Settings".
2. Then select "Power Saving Setting" followed by
"Set Functions Available for Standby Mode".
3. Finally select "Supply Power from USB Ports" and
ensure it is ticked.
4. You can now charge your DUALSHOCK®4 Wireless
Controller with your Twin Docking Station whist in
Standby Mode.
Care & Maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you to protect your
warranty coverage:
• Keep your device out of the reach of small children.
• Keep the device dry. Precipitation, humidity and all
types of liquid or moisture can contain minerals that
will corrode electronic circuits. If your device does
get wet, allow it to dry completely.
• Do not use or store the device in dusty, dirty areas,
as moving parts and electronic components of your
device can be damaged.
• Do not use or store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt certain
plastics.
• Do not use or store the device in cold areas. When
the device returns to its normal temperature,
moisture can form inside the device and damage
electronic circuit boards.
• Do not short circuit the battery.
• Do not drop, knock or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the device. All of the
previous suggestions apply equally to your device,
battery, charger or any enhancements.