HoMedics enviraScape WFL-CANRUS Manual De Instrucciones Y Garantía página 3

WFL-CANRUS_A.qxd 11/10/06 2:48 PM
EnviraScape Features
• Unique LED lighting creates a realistic candlelight effect.
• Built-in sound machine with four soothing sounds.
• The soothing sound of cascading waters create a stress
free ambiance.
• Improves concentration by masking distractions so you
can stay focused.
• Innovative design enhances the environment at home or
at work.
• Durable electrical water pump can be operated from any
indoor electrical outlet.
• Convenient tabletop size - fountain measures
5.75"L x 5.75"W x 12"H (14.6 L x 14.6 W x 30.5 H cm).
Figure 1
Lights
ON/OFF
Switch
Adaptor
Sound Button
Page 5
Top
Side
Panels
Body
Tube
Pump
Base
4
Assembly and Instructions for Use
1. Unpack the product. Wipe off dust with a damp
cloth.
2. Familiarize yourself with the pump. The pump speed
is controlled by the switch located at the front of the
pump. The speed is indicated by a plus (+) and
minus (-) sign. To increase the speed, move the
switch slowly in the direction of the plus sign. You
will hear a click as the switch moves to each speed
level. At its highest speed level, the switch will
cease to move any further. To decrease the pump
speed, move the switch toward the minus sign.
Similarly, at its lowest speed, the switch will cease
to move any further. NOTE: It is recommended the
pump be set at its highest speed during assembly
and later adjusted to a lower setting if desired. Be
sure to unplug the pump before adjusting the
speed setting.
3. Insert the tube located on the bottom side of the
fountain body into the pump. (Fig. 2)
4. Fill base with tap water to 1/2" from top. We
recommend using distilled water to prevent
mineral build up (Fig. 3).
Note: We recommend filling the water from the
sides of the base to protect the front sound button
and the back volume dial from water spills.
5
Figure 2
Insert tube
Tube
into pump
Pump
Figure 3
Fill with water 1/2"
from top