Silver Eagle SE750 Instrucciones De Operación página 2

SE750 PNEUMATIC DOOR SKINNER:
Industry Background:
• Installing door skins has always been a very tedious labor intensive job originally done with a hammer and dolly.
• Other tools have been designed over the years to simplify this job, but all of these tools offer minimal improvement at best.
• A very deliberate sustained effort, to develop a better way of crimping a door skin flange, resulted in the development of the "SE750" tool.
Features of the SE750:
• Precision machined aluminum head, hardened shafts, and ball bearing construction throughout, which will provide a long life and maximum
durability for many years of trouble free service for real world professional use.
• Forged and hardened steel crimping head is specially designed to roll the steel flanges over with a minimum of physical effort,
and leaves the flange smooth without unsightly ripples.
• Nylon dolly pad is made of a special nylon polymer, which inherently has lubricating properties, to help minimize physical effort
and virtually eliminate damage to exterior surfaces of the door skin.
• The SE750 is manufactured to be very versatile with provisions to accommodate virtually any door flange thickness, by simply loosening
two socket head screws and sliding the Nylon Dolly pad fore or aft, and re-tightening the screws.
• Powerful pneumatic drive motor with planetary gear reduction reduces the speed and allows for maximum range of motion of the crimping head.
• Design allows tool to maneuver around inner and outer curves as well as most body design features.
• Close tolerance design and manufacturing, results in a tool that is incredibly smooth, quiet, and easy to use.
Benefits to technicians:
• Drastic reduction in the time required to install a door skin. As much as an hour or more can be expected improving your bottom line
in a commission or rate environment.
• Drastic reduction in operator fatigue, leads to fewer cases of carpal tunnel syndrome and other repetitive motion ailments.
• One handed operation to allow for free hand to manipulate the work piece.
• Light weight and maneuverable yet very powerful
• Variable flange thickness adjustment allows for accurate dispersement of panel adhesive in the crimped area resulting in a smooth glue bead.
Benefits to management:
• The drastic reduction in the time required to install a door skin significantly reduces labor costs.
• Drastic reduction in operator fatigue, leads to fewer cases of carpal tunnel syndrome and other repetitive motion ailments which reduces potential
workman's comp claims and costs.
• Elimination of damage to the outside of the door skin further reduces labor during finishing.
• Drastic improvement in the quality of the finished product. The finished crimp typically is indistinguishable from a factory crimp.
• The reduction in labor, results in a very short payback period on your investment. In many cases the "SE750" tool pays for itself within weeks.
Model:
SE750
2