CyberPower Systems OR1000ERM1U Manual Del Usuario página 9

Low
Transfer
Voltage
Sensitivity
Low
Battery
Warning
Self Test
Buzzer
Setting
189V-207V
▃ Low
▃▄ Normal
▃▄▅▆ High
5/6/7/8 mins
Yes
Escape to function menu
Buzzer on
Buzzer off
If the utility voltage is
usually high, and the
connected equipment
can work in this
condition, you can set
the output voltage
range higher to reduce
the UPS from going to
Battery Mode as often.
195V In Local Power Quality
settings, 10 fixed
voltage ranges can be
chosen. However, you
can fine tune the Low
Transfer Voltage in this
function.
If the utility voltage is
usually low, and the
connected equipment
can work in this
condition, you can set
the output voltage
range lower to reduce
the UPS from going to
AVR Mode or Battery
Mode as often.
Normal If the connected
equipment can tolerate
more power events
(Example: unstable
power often associated
with stormy weather),
select Low Sensitivity.
The UPS will go to
Battery Mode less
often. If the connected
equipment is more
sensitive to power
events, select High
Sensitivity. The UPS
will go to Battery Mode
more often.
5 mins The audible alarm will
continuously beep
when the remaining
runtime is less than the
selected value.
No Action In Line Mode, select
YES to perform a Self
Test on the battery.
Buzzer on "b.on" is buzzer
enabled; "b.oF" is
buzzer disabled.
If b.oF is selected, the
unit will mute all alarms
except for fault or
overload condition.
8