Care & Maintenance; Cleaning The Air Quality Sensor - Levoit LV-H133 Manual Del Usuario

C A R E & M A I N T E N A N C E
Cleaning the Air Purifier
1. Wipe the outside of the air purifier with
a dry cloth. Do not
any other liquid to avoid risk of electric
shock.
2. Clean the outside of the filter with a
brush or vacuum hose each month
to prevent buildup of hair or dust. Do
not clean the filter with water or other
liquids.

Cleaning the Air Quality Sensor

If the air quality sensor is blocked by
accumulated dust, the air quality indicator
may not work correctly.
1. Unplug the air purifier.
2. Open the sensor cover.
3. Clean the sensor lens with a damp
cotton swab. [Figure 3.1]
4. Dry the sensor lens with a dry cotton
swab.
5. Close the sensor cover.
Figure 3.1
clean with water or
lens inside
opening
Check Filter Indicator
will light up as a reminder to check the
filter. The indicator is automatic. You may
not need to change your filter yet, but you
should check it when
Resetting the Check Filter Indi-
cator
Reset the Check Filter Indicator when:
• lights up.
1. Replace the filter (see 12).
2. Turn on the air purifier.
3. Press and hold
4. The light will turn off after the filter
indicator is successfully reset.
• The filter was changed before
1. Press and hold
until lights up.
2. Press and hold
seconds.
3. The light will turn off after the filter
indicator is successfully reset.
Storage
If not using the air purifier for an extended
period of time, wrap the filter in plastic
packaging and store in a dry place to avoid
moisture damage.
lights up.
for 3 seconds.
lit up.
for 3 seconds
again for 3
EN
11