General Electric AEW08 Manual Del Usuario página 12

Installation Instructions
4. PREPARE THE WINDOW
Cut the window sash seal to the proper length.
Peel off the backing and attach the seal to the
underside of the window sash.
12
5. INSTALL THE AIR CONDITIONER
IN THE WINDOW
A.
Place the air conditioner on the sill with the
bottom mounting rail against its back edge. Center
it and close the window securely behind the top
mounting rail. It should be level or slightly tilted to
be the correct case slant to the outside.
3 Screws
2 Frame locking brackets
B.
Extend the left and right accordion panels to the
vertical window sashes and attach, through the
holes in the panels, with 3 Type B screws, as
appropriate.
C.
Install the frame locking brackets between the
bottom of the accordion panel and the window sill.
Attach with 2 screws.
NOTE: To prevent the
window sill from splitting,
drive the pilot holes before
driving the screws.
49-5000083