Programming Track Numbers - Philips AX2000 Manual Del Usario

Programming track numbers

You can store up to 30 tracks to play in a program.
A single track may be stored more than once in the
program.
1 While playback is stopped, select a track with
∞ or §.
2 Press PROGRAM to store the track.
lights up; the track number
y
PROGRAM
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2; to start playback of your selected tracks.
is shown and playback starts.
y
PROGRAM
• You can review the program by pressing PROGRAM for more than 2 seconds.
The display shows all the stored tracks in sequence.
y
Notes: – If you press PROGRAM and there is no track selected,
SELECt is displayed.
– If you try to store more than 30 tracks, FULL is displayed.
Clearing the program
• While playback is stopped, press 9 to clear program.
CLEAr is displayed once,
y
and the program is cleared.
Note: The program will also be cleared if the power supply is interrupted, or if the
CD-player lid is opened, or if the set switches off automatically.
goes off,
PROGRAM
FEATURES
15