14 TROUBLESHOOTING
NOTICE
► Do not make any unauthorised alterations or
modifications to the unit.
► Never open the housing. Contact the manufacturer
for repairs.
If the camera remains faulty even after below solutions are
tried or if other defects are found, contact the manufacturer.
The contact details can be found in section 18.
Fauit/Problem
Camera does not
switch on
Photos are not
being taken
42
INSTRUCTION MANUAL LUNIOX VC24
Solution
ऀ Check whether the batteries used
still have sufficient power.
ऀ Check the batteries for correct
polarity.
ऀ Check if the memory card has
enough space.
ऀ Check whether the batteries used
still have enough power.
ऀ Make sure that the mode switch is
in the „ON" position.
ऀ Format new memory cards before
first use or use a different memory
card.
530710 | 12 | 2020 | V2