INSTRUCTION MANUAL LUNIOX VC24
Subject is not
captured
Detection range at
night is too small
530710 | 12 | 2020 | V2
ऀ Check the sensitivity of the motion
sensors:
Set the sensitivity to „Low" for
warm ambient temperature
and to „High" for cold ambient
temperature.
ऀ Position the camera so that no
heat sources are targeted. This also
applies to a rising or setting sun.
ऀ Make sure that there are no moving
objects in the angle of detection
(e.g. water, bushes).
ऀ Position the camera above ground.
ऀ Attach the camera to stationary
objects such as trees.
ऀ The object to be photographed
is moving too fast through the
detection
camera further back or realign the
camera.
ऀ Make sure that all batteries are
fully charged.
ऀ Make sure that there are no other
light sources in the recording area
at night.
ऀ Certain environments (e.g. with
trees) are better suited for night-
time shooting because they reflect
IR light better. Do not place the
camera in front of an empty area.
angle.
Position
DE
EN
EN
FR
IT
NL
SV
ES
PL
the
43