Product Specifications; General Safety Warnings - Promaker PRO-TP500 Manual Del Usuario

PRODUCT SPECIFICATIONS

Voltage /
Frequency
Power
Speed
Chuck size
Weight
Cord

GENERAL SAFETY WARNINGS

WARNING: Before using this
tool or any of its accessories, read
this manual and follow all Safety
Rules and Operating Instructions.
The important
safeguards
appearing in this manual are
not meant to cover all possible
situations. It must be understood
that common sense and caution
are factors which cannot be built
into the product.
EYE, EAR & LUNG PROTECTION
ALWAYS
PROTECTION
CONFORMS WITH CSA
REQUIREMENTS or ANSI
SAFETY
Z87.1
FLYING DEBRIS
permanent eye damage. Prescription
eyeglasses ARE NOT a replacement
for proper eye protection.
WARNING:
eyewear can
injury if broken during the
operation of a power tool.
120V / 60Hz
500W
0-2800rmp
1/2"(13 mm)
4.62Lb
2m
precautions,
and instructions
WEAR
THAT
STANDARD
can cause
Non-compliant
cause serious
WARNING:
protection,
extended periods of operation
of the tool, or if the operation is
noisy.
SAVE THESE INSTRUCTIONS FOR
REFERENCE
WEAR A DUST MASK THAT
IS DESIGNED TO BE USED
WHEN
POWER TOOL IN A DUSTY
ENVIRONMENT.
is created
sawing,
other construction activities may
contain chemicals that are known
to cause cancer, birth defects, or
other genetic abnormalities. These
chemicals include:
• Lead from lead-based paints.
• Crystalline silica from bricks,
cement, and other masonry
products.
• Arsenic and chromium from
chemically treated lumber.
EYE
The level of risk from exposure to
these chemicals varies, according
to how often this type of work is
performed. In order to reduce
exposure to these chemicals, work
in a well-ventilated area, and use
approved safety equipment, such
as a dust mask that is specifically
designed to filter out microscopic
particles.
ELECTRICAL SAFETY
WARNING: To avoid electrical
hazards, fire hazards or damage
to the tool, use proper circuit
protection.
Use
particularly
OPERATING
WARNING:
by power
grinding, drilling,
hearing
during
A
Dust that
sanding,
and
2