Harbor Breeze 40308 Manual Del Usuario página 4

SAFETY INFORMATION
CAUTION:
• TURN OFF ELECTRICITY at the main fuse box (or circuit breaker box) before beginning
installation by removing the fuse (or switching the circuit breaker off). If you are not sure the lighting
system has a grounding means, DO NOT attempt to install this fixture. Contact a qualified, licensed
electrician for information regarding the proper grounding methods as required by the local
electrical code in your area.
• All fixtures must be mounted to a ceiling fan that is mounted to an outlet box that is supported by
the building structure.
• DO NOT use bulbs having a wattage greater than the maximum value stated on the fixture. The
use of bulbs with higher wattage than specified will increase temperatures and risk of fire.
• If a dimmer control switch is used with this fixture, obtain professional advice to determine the
correct type to use as well as the electrical rating required.
PREPARATION
Before beginning the assembly of this product, ensure that all parts are present. Compare all parts
with the package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, pliers, wire
cutters, safety glasses, step ladder, wire connectors (included with fan), and electrical tape
Helpful Tools (not included): Wire strippers, A/C tester light, wiring handbook, soft cloth
ASSEMBLY INSTRUCTIONS
1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power supply
prior to installation may result in serious injury or death.
1
Lowes.com/harborbreeze
4