Turning On; Use - PAJ VEHICLE FINDER 2.0 Manual Del Usuario

2. Connect the device to the battery. Connect
with the fuse to (+).
Attention! The poles must never be reversed.
Note: When connected to the power supply, the Vehicle
Finder 2.0 4G switches on immediately and the LED lights
If the FINDER is not connected to the vehicle battery, but at a
different point (e.g. fuse box), this can result in the ignition
on / off function not being accurately recognized.

2.6 Turning on

After a successful activation you can switch on the VEHICLE
FINDER 2.0 4G. By connecting the FINDER to the power supply
the device has already been switched on.
For the initial startup of the Vehicle Finder 2.0 4G uncovered
locations, such as the garden or the terrace (i. e. not inside
the home, the garage, the cellar or the like) are

2.7 Use

Once the activation, switching on and the transfer of a first
database has been successful, you can attach the FINDER to a
location of your choice and view the position of the FINDER
Connect the black cable to Minus (-).
emit a signal.
1.
Fuse
recommended.
Vehicle Finder 2.0 4G by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
2.
Black
Battery
2.
8-32V
Red
21
the red cable