Motion CM-19 Manual página 8

3 Play a scene
Select a desired scene by pressing the scene + / - button on the domotica box until the
3.1
desired scene has been found. Press the play button to activate the scene.
scene
+ -
Play all scenes on the desired location of the domotica box to make sure the range of
the domotica box is sufficient. If the range is not optimal, you can use a power bank to
search for the best location.
When the play button is pressed while the blinds are moving,
the play button acts as a stop button.
pair unpair
3. PLAY A SCENE
play