General Information - CDVI GALEO Manual De Instalación

INSTALLATION MANUAL
GALEO
Illuminated Weatherproof Keypad with remote electronics
Thank you for buying our products and for the confidence you placed
in our company.

1] GENERAL INFORMATION

Polished heavy duty Zamak
Backlit keys.
2 to 3 relays.
Surface mount.
Free voltage.
mounting with Torx
Keypad sealed with epoxy.
PcB of remote electronics protected
with a varnish coating.
100 user codes customisable
by each user.
Available in Wiegand version (GAleoW).
Audible and visual feedback.
Dimensions (L x W x D):
GALEO = 110 x 75 x 15mm,
Remote Controller = 147 x 124 x 55mm.
Power supplies: 12V to 24V ac and 12V to 48V dc.
Consumption (when 3 relay outputs activated.
and keypad illuminated):
- 12V AC: Standby 90mA,
- 24V AC: Standby 46mA,
- 12V DC: Standby 100mA,
- 24V DC: Standby 55mA,
- 48V DC: Standby 30mA.
2] NOTES & RECOMMENDATIONS
Cable
The distance between the GALEO and the remote
electronic can not exceed more than 10 meters.
Make sure that the cable is not near by a high vol-
tage cables (ex: 230 V AC).
Recommended cable between
the GALEO and the remote electronic
To expand the supplied 3 meter cable, select a 2
twisted pairs cable (4 wires), SYT1 0.8MM (AWG 20).
Recommended power supplies
suitable for the GALEO
- ARD12 (230V input)
- BS60 (230V input)
2
cdvigroup.com
cast alloy.
®
screws
®
Environmental tests:
vibrations
WEEE
Environmental test:
Salt spray
IP64
CE certification
-25°C to +70°C
remoTe conTroller
CE certification
WEEE
Mounting recommendations
Mount the keypad on a flat surface to avoid
any vandalism and to insure the best mounting.
Security advice
For security advice reasons, change
the factory default master code.
When selecting a master code and user code avoid
sequencial codes (example : 3 4 5 6 7).
Back EMF protection
To secure the system from back electromagnetic
fields do not forget to mount the varistor
in parallel on the lock.
EN
75
IP52
-20°C to +70°C
* Tension libre.