Functions - Vissani MDTF18WH Guía De Uso Y Cuidado

Assembly

FUNCTIONS

Temperature
Control
1. DISPLAY
Once initially powered on, the display screen is on full display for 3 seconds. The refrigerator default setting is medium, and the LED 3
indicator will be illuminated. This is normal operation display in case of a failure, the appropriate LED light will ash in sequence.
In case of no failures, the current temperature setting of the refrigerator will be on display.
2. TEMPERATURE SETTING
Each time the temperature setting
After the temperature setting has been completed, the refrigerator will run according to the set value after 25s.
From left to right, the temperature is lower.
The order of coldness settings is as follows:
LED1
3. STANDBY MODE
To enter standby mode, press the setting
operate and the standby indicator light will be illuminated. To resume normal operation, just press the setting
4. SETTING THE FREEZER TEMPERATURE
TEMP.
Mid
CONTROL
COLD
Turn the controls to adjust the freezer temperature.
Place frozen food into the freezer as quickly as possible after purchase. Pay attention to the storage time on the food packaging
instructions. The storage life of frozen foods varies and the recommended storage time should not be exceeded.
A B C D
COLD
SET
A. Setting button
B. LED1 COOL indicator
C. LED2 indicator
D. LED3 indicator
E. LED4 indicator
F. LED5 COOLEST indicator
G. LED6 STANDBY mode
is pressed once, the temperature setting changes one time.
LED2 LED3 LED4
for 3 seconds when the refrigerator is running. In standby mode, the compressor will not
COLDER
E F G
STANDBY
Hold SET-button for 3-sec
for standby
COLDEST
LED5
14
momentarily.