Style selections SSR3472CLSV Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
3. Insert return panel (L) into fixed panel jamb (A)
slot, making sure that the return panel (L) is
level. If return panel (L) is not level, install spac-
ers (TT) on bottom as needed. Starting at the
bottom, place gasket (B) inside shower between
return panel (L) and fixed panel jamb (A). Using
a knife, cut remaining gasket (B) on top.
Hardware Used
TT Spacer
4. Install corner gasket (M) onto the secured return
panel (L) and fixed panel (C). Ensure fixed panel
(C) is level. If fixed panel (C) is not level, use
spacers (QQ) as needed.
Hardware Used
QQ Spacer
5. Insert wall bracket cover (VV) on left side of top
rail (F) and wall bracket cover (II) on right side of
top rail (F). Insert track nut (DD) and screw guide
(EE) into both front holes on top rail (F).
Hardware Used
Track Nut
DD
EE Screw Guide
II Wall Bracket Cover
Wall Bracket Cover
VV
3
x 2
4
L
x 2
5
x 2
x 2
x 1
x 1
B
Top
View
A
TT
C
QQ
VV
DD
EE
L
M
C
M
L
C
F
II