3- Configuration; 4- Errors / Diagnostics Display; Three Phase - VESTEL Klefr 6924 Guia De Instalacion

4
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Finally, you can turn on the main switch in the distribution box you turned off before.

3- CONFIGURATION

You must use the KLEFR meter with default configurations. Please check the configuration
parameters. For detailed configuration parameters and information you can check the KLEFR
datasheet provided.
• Baudrate 9600
• 8 data bits
• Even parity
• 1 stop bit

4- ERRORS / DIAGNOSTICS DISPLAY

4.1- THREE PHASE

If the third, fourth or fifth digit shows a 0 (zero); please check the wiring for power issues.
The meter is equipped with a display field that shows errors and diagnostics. It consists of the
character S followed by 2 + 3 digits. The meaning of each digit is as follows:
DIP Switch Positions
5
OFF
OFF
ON
ON
OFF
OFF
ON
ON
Table-2
© 2021 Vestel - All rights reserved
Current Limit Value
6
Power Optimizer
OFF
Disabled
ON
OFF
ON
OFF
ON
OFF
ON
16
20
25
32
40
63
80
English - 9