Yamato 51206 Manual De Instrucciones página 19

Check the hoses, the ash filter and the extractor regularly when extracting, to assess
l
levels of heating.
If the appliance heats up, switch it off, pull the mains plug out and remove the filter bag
l
immediately. Separate the ash filter from the extractor and remove the extracted
material. Next, let the extractor and the ash filter cool off outside, under supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
l
agent or similarly qualified persons in order to avoid a hazard.
"Cold Ash" is ash cooled down for a sufficient time without any pockets of embers
l
inside. This can be confirmed by scouring the ash for pockets of embers by using metal
tools before using the ash vacuum cleaner. Cold ash does not emit any recognizable
heat.
After and before vacuum cleaning, empty and clean the tank in order to prevent the
l
accumulation of materials which could present a fire hazard in the vacuum cleaner.
2. Area of application
- Substance to be vacuumed - cold ashes from fireplaces, wood/coal stoves, ashtrays, grill
- empty and clean vacuum cleaner before and after vacuuming to avoid the collection of
materials that could pose a fire hazard in the vacuum cleaner
Restriction of use
- do not use for the separation of health-hazardous dusts (dust classes L, M, H)
- vacuum only ashes from admissible fuels
- do not vacuum any hot, burning or glowing objects
- do not vacuum any objects that are hotter than > 40 °C
- do not vacuum any flammable substances
3. Layout and items supplied
1 Handle
2 On/Off switch
3 Appliance head
4 Filling level indicator
5 Locking hook
6 Tank
7 Suction hose connector
8 Suction tube
9 Flexible hose
10 Filter cartridge
4. Intended use
The ash vacuum cleaner is suitable for vacuuming cold ash or cold material residues from
fireplaces, charcoal ovens, ash-trays or barbecues.
The machine is to be used only for its prescribed purpose. Any other use is deemed to be a