Prepare The Site - Kohler K-5414 Guia De Instalacion

Wall
Bracket

1. Prepare the Site

Rough-in the supply and drain piping according to the
roughing-in.
Use suitable fasteners (not provided) to install the wall bracket to
a reinforced area of the wall. Refer to the "Roughing-In" section to
determine the correct height for your installation.
Place the fastener hole in the bottom of the wall bracket exactly
4-3/4" (12.1 cm) down from the desired drinking fountain height.
105128-2-AB
4-3/4"
(12.1 cm)
Suitable
Fastener
4 Kohler Co.