Chimney Assembly - Aspes ACI1660B Manual De Instrucciones

CHIMNEY ASSEMBLY

The chimney can only be installed with exhausting hood.
Lower Decorative Chimney
 Fix a Chimney fixing bracket 21 onto the Lower Decorative Chimney with 2 screws 12
(4.2 x 9.5) supplied with the hood.
21
2.1
12
Hook the brackets 13 onto the hood body,and fix them with 2 screws 12 (4.2 x 9.5),making

sure that they are well seated.
Slightly widen the two sides of the lower chimney and hook then between the brackets

13,fix the lower chimney onto the brackets 13 with 2 screws 12 (4.2 x 9.5) supplied with
the hood.
Upper Decorative Chimney
 Slightly widen the two sides of the upper chimney and hook them between the wall and the
bracket 21 which is fixed on the Lower Decorative Chimney.
 Fix the upper chimney onto the bracket 21 with 2 screws 12 (4.2 x 9.5) supplied with the hood.
EN-8