How To Wire Your Ceiling Fan - Rejuvenation Heron Manual Del Propietário

WARNING
To avoid possible fire or shock, be sure electricity is
turned off at the main fuse box before hanging.
(Figure 1)
1. Connect the green grounding lead from the hanger
ball and the green grounding lead from the hanger
bracket to the supply grounding conductor (this may
be a bare wire or wire with green colored insulation).
Securely connect wires with wire connectors supplied.
(Figure 2)
2. Securely connect the white fan motor wire to the
white supply (neutral) wire using wire connector
supplied. Securely connect the black fan motor wire
and blue wire to the black supply wire using wire
connector supplied. (Figure 2)
3. After splicing and making the wire connections, the
wires should be spread apart and turned upward with
the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the
ungrounded conductor on the other side of the outlet
box. (Figure 3)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.

How to Wire Your Ceiling Fan

BLACK FAN
WIRE
GREEN WIRE
(GROUND)
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
GREEN WIRE
(GROUND) FROM
HANGER BALL
HARDWARE USED:
WIRE
CONNECTORS
Green Wire
(Ground) from
Supply
Green Wire
(Ground) from
Hanger Bracket
Green Wire
(Ground) from
Hanger Ball
9
MAIN FUSE BOX
Figure 1
BLACK
LISTED
OUTLET BOX
HOUSEHOLD
SUPPLY
WHITE
BLUE
Figure 2
X 3
White Wire
from Supply
Listed
Outlet Box
Household
White Wire
Supply
from Fan
Black Wire
from Supply
Blue Wire
from Fan
Black Wire
from Fan
Figure 3