MI-300T/MI-350T/MI-400T
sunlight,
rain exposure, snow layup, UV etc. Allow a minimum of 2 cm of space around the microinverter
enclosure to ensure ventilation and heat dissipation.
*Nota: En algunos países el DTU deberá cumplir con la regulación de la red local (por ejemplo, G98/99 para el Reino
Unido, etc.)
5.3 Distancia de Espacio Requerida
If the microinverters are installed on a concrete roof or steel roof, the communication with the
DTU
may be slightly affected. Under such installation conditions, it is better for the microinverters to
be
installed 50cm above the roof. Otherwise, more DTUs may be required to ensure the
communication
quality between the DTUs and the microinverters.
© 2019 Hoymiles Power Electronics Inc. All rights reserved.
11