Placement Of Ir Receiver - Marmitek TV Anywhere Wireless HD Modo De Empleo

4.4.1 Placement of IR receiver

The IR receiver receives the commands sent by your (infrared) remote control and
sends these to the IR led, enabling you to operate your connected HDMI sources.
• Connect the IR receiver cable (1) to the HD receiver, using the connector marked
"IR''.
• Install the IR receiver so it can receive the transmitted commands from your
(infrared) remote control (max. 10 metres from the remote control).
• The most logical place for the IR receiver is near your
second TV or projector.
• Using the self-adhesive strip, placement is possible virtually
anywhere.
• Please experiment with correct placement before final
attachment of the IR receiver.
Please note! The adhesive strip may cause discolouration on certain surfaces,
or leave adhesive residues after removal.
TV Anywhere Wireless HD™ 9