Pressure W Asher Maintenance - Craftsman 580.752510 Instrucciones De Uso

OWNER'SRESPONSiBiLiTiES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
Changeengine oil
* Check/clean water inlet screen'
, Check high pressure hose
, Check detergent siphoning hoses
, Check spray gun and assembly for leaks
, Cleandebris
, Check engine oil level
Cleanengine air cleaner2
Changeengine oil2
, Check/adjust spark plug
* Inspect muffler and spark arrester
, Check/adjust idle speed3
* Check/adjust valve clearance 3
* Cleanfuel tank & filter _
Cleancombustion chamber _
Replace engine air cleaner
Replace spark plug
Checkfuel tube_ (Replace if necessary)
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedulechart above.
NOTICE Once a year you should clean or replacethe spark
plug and replacethe air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer.
PumpOil
DONOT attempt any oil maintenanceon this pump. The
pump is pre-iubricated and sealed from the factory, requiring
no additional maintenance for the life of the pump.
EmissionsControl
Maintenance, replacement, or repair of the emissions
controldevices and systemsmay be performed by any non-
road engine repair establishment or individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorized dealer. Seethe
Emissions Warranty.
BeforeEach Use
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screen for damage.
4. Checkhigh pressure hose for leaks.
5. Checkgun and nozzle extension for leaks.
6. Purge pump of air and contaminants.
PRESSURE W ASHER MAINTENANCE
Clean Debris
Daily or before use, clean accumulated debris from pressure
washer. Keeplinkage, spring and controls clean. Keep area
around and behind muffler free from any combustible debris.
inspect cooling air slots and openings on the pressure
washer. These openings must be kept clean and
unobstructed.
Pressure washer parts should be kept clean to reduce the
risk of overheating and ignition of accumulated debris.
• Use a damp cloth to wipe exterior surfaces clean.
' Clean if clogged. Replace if perforated or torn.
2 Service more often under dirty or dusty conditions.
3 These items should be serviced by your servicing dealer.
GeneralRecommendations
Regular maintenance will improve the performance and
extend the life of the pressure washer. See any Sears or
other qualified service dealer for service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailed in Storage.
NOTICE improper treatment of pressure washer could
damage it and shorten its life.
• DONOTinsertanyobjectsthroughcoolingslots.
* Use a soft bristle brush to loosen caked on dirt, oil, etc.
, Use a vacuum cleaner to pick up loose dirt and debris.
Checkand Clean Inlet Screen
Examinegarden hose inlet screen. Cleanif it is clogged or
replace if it is torn.
17