sunjoe 24V-HT22-LTE Manual Del Operador página 2

Power Tool Use + Care
1. Do not force the power tool. Use the correct power
tool for your application – The correct power tool will
do the job better and safer at the rate for which it was
designed.
2. Do not use the power tool if the switch does not turn
it on and off – Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
3. Disconnect the battery pack from the power
tool before making any adjustments, changing
accessories, or storing power tools –
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool – Power
tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use – Many accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and clean – Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed – Use of the power tool for
operations different from those intended could result in a
hazardous situation.
Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
Additional Safety Rules for Hedge
Trimmer
1. Remove any blade that has been damaged. Always make
sure that the blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
2. Hold the hedge trimmer by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may electrify
exposed metal parts of the power tool and could give the
operator an electric shock.
3. Maintain a firm grip on both handles while cutting with the
blade. Keep the blade away from body.
4. Hold hedge trimmer properly, e.g., with both hands if two
handles are provided. Loss of control can cause personal
injury.
5. Check the hedge for foreign objects before operation,
e.g., center fences. Take care that the cutting device does
not come in contact with wire or other metal objects.
6. Service on the product must be performed by qualified
repair personnel only. Service or maintenance performed
by unqualified personnel could result in injury to the user
or damage to the product.
7. Keep all parts of the body away from the cutting blade.
Do not remove cut material or hold material to be cut when
blades are moving. Make sure the switch is off and the
battery is removed when clearing jammed material.
A moment of inattention while operating the hedge trimmer
may result in serious personal injury.
8. Carry the hedge trimmer by the handle with the cutting
blade stopped. When transporting or storing the hedge
trimmer always keep the blade covered. Proper handling
of the hedge trimmer will reduce possible personal injury
from the cutter blades.
9. Do not use the hedge trimmer if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
10. Use the hedge trimmer and accessories in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the
power tool for operations different from intended use
could lead to a hazardous situation.
11. Do not overreach and to keep the balance at all times.
Always be sure of the footing on slopes. Walk when
operating the power tool, never run.
12. Do not touch moving hazardous parts before the battery
pack is removed and the moving hazardous parts have
come to a complete stop.
13. Always wear eye and ear protection. Wear protective mask
if necessary. Dress properly, do not wear loose clothing
or jewelry that could become caught in moving parts of
the unit. Safe, sturdy, nonskid footwear should always be
worn. Long hair should be tied back.
14. Do not using the machine in bad weather conditions
especially when there is a risk of lightning.
15. Inspect the area to be cut and remove any foreign objects
that will influence your cutting. If the foreign objects
can not be removed, e.g. wire fences, please mark and
remember it to avoid toughing them during cutting.
m
DANGER!
Keep hands away from blade. Contact with
blade will result in serious personal injury.
Training
1. Read the instructions carefully. Be familiar with the
controls and the proper use of the product.
2. Never allow people unfamiliar with these instructions or
children to use the product. Local regulations can restrict
the age of the operator.
3. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
2