Publicidad
Idiomas disponibles
Idiomas disponibles
Opening your life
MANUAL AL3900U
TECHNICAL FEATURES
Model AL3900U
1 Battery 2032 (3V)
Frequencies 300 - 900 Mhz ü
3 Channels
Special Chip
IN AL3900U THE USER CAN PROGRAMME DIFFERENT BRANDS AND FREQUENCIES IN EACH BUTTON JUST FOR SEQUENTIAL FLASH
MODE
ENTERING DIRECTLY THE RECEIVER MODE
PROGRAMMING INSTRUCTIONS
1. Locate the selector switch in the back of the remote. Retire the cover to expose the selector switch and the hidden button, see image
below.
2. Set your selector switch of 8 DIPs switchwith the desired brand. See Table 1 and image below.
3. Head for your receiver, in case it has DIPs switch, this de nes the code of this speci c receiver, please select this same combination from
the receiver in the transmitter AL3900U.
C, both must match, otherwise the communication between them will not work. In case your receiver doesn't have this DIP selector, this
section must be ignored, it is not neccessary.
4. The remote is ready to be used, press any button (from 1 to 3) please refer to your receiver's user manual.
Brand selector
Seed button
ATTENTION! If you want to program AL3900U directly in our receiver Omni - Pulse, you need to set following DIPS switches positions in
the remote and receiver:
AL3900U
Omni - pulse
Publicidad
