Publicidad
Idiomas disponibles
Idiomas disponibles
Opening your life
SEQUENTIAL FLASH MODE
1. To work with this function select dip position on the table below.
2. Press the hidden button for 1 second to activate this mode, the LED lights permanent on.
3. Select the desired normal button, depending on how many times you press it, it will be selected a di erent brand. There are 9 di erent
brands available, refer to table below. The remote will ash to indicate the brand selected.
4. Press hidden button to exit.
For instance:
HIDDEN BUTTON 1s + PRESS 2 TIMES ORDINARY BUTTON 2 x FLASH+ HIDDEN BUTTON
LIFTMASTER 390 MHZ
If the user press the button 1 time, the remote will ash 1 time, if immediately after the user press again, it will ash 2 times and so on, it
is not necessary to wait this ash between one touch and the following, it's just an indicator, it has no in uence.
If the ash time is the required one, press hidden button to exit and the brand will be the one you required. Remember the buttons work
independently, you can programme 3 di erent brands of three buttons.
Publicidad
