Behringer XENYX QX1202USB Manual Del Usuario página 37

Ocultar thumbs Ver también para XENYX QX1202USB:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Specifications
QX1202USB
Mono Inputs
Microphone Inputs (XENYX Mic Preamp)
Type
XLR connector, balanced, discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance
@ 50 Ω source resistance
@ 150 Ω source resistance
Frequency response
(-1 dB)
Frequency response
(-3 dB)
Gain range
Max. input level
Impedance
Signal-to-noise ratio
107 dB / 110 dB A-weighted, +22 dB Gain
Distortion (THD + N)
Line Input
Type
Impedance
Gain range
Max. input level
Frequency Response (Mic In
Main Out)
<10 Hz - 137 kHz
Stereo Inputs
Type
Impedance
20 kΩ balanced, 5 kΩ unbalanced (-10 dBV)
Gain range
Max. input level
CD/Tape In
Type
Impedance
Max. input level
Equalizer
Low
Mid
High
Aux Sends
Type
Impedance
Max. output level
Aux Returns
Type
Impedance
Max. input level
QX1002USB
-133 dB / 137 dB A-weighted
-130 dB / 134 dB A-weighted
-127 dB / 131 dB A-weighted
<10 Hz - 150 kHz (-1 dB)
<10 Hz - 200 kHz (-3 dB)
+10 dB to +60 dB
+10.8 dBu @ +10 dB Gain
1.9 kΩ balanced
0.006% / 0.005% A-weighted
¼" TRS connector, balanced
20 kΩ balanced, 10 kΩ unbalanced
-10 dB to +40 dB
+21 dBu @ 0 dB Gain
±3 dB
2 x ¼" TRS connector, balanced
20 kΩ balanced, 10 kΩ unbalanced
(+4 dBu operating level)
-20 dB to +20 dB
+22 dBu
RCA connector
19.5 kΩ
+21 dBu
80 Hz / ±15 dB
2.5 kHz / ±15 dB
12 kHz / ±15 dB
¼" TRS connector, balanced
120 Ω
+21 dBu
¼" TRS connector, balanced
20 kΩ balanced, 10 kΩ unbalanced
+21 dBu
QX1202USB
Main Outputs
Type
Impedance
Max. output level
Control Room Output
Type
Impedance
Max. output level
Phones Output
Type
Max. output level
CD/Tape Out
Type
Impedance
Max. output level
Main Mix System Data (Noise)
Main mix @ -∞,
channel fader @ -∞
Main mix @ 0 dB,
channel fader @ -∞
Main mix @ 0 dB,
channel fader @ 0 dB
FX Section
Type
Converter
Sample rate
Power Supply
USA/Canada
Adapter
Australia
Adapter
U.K./Europe
Adapter
China/Korea
Adapter
Japan
Adapter
Output
USB
Connecter
Sample rate
Physical/Weight
50 x 250 x 248 mm
Dimensions (H x W x D)
(2.0 x 9.8 x 9.8")
Weight
1.5 kg (3.3 lbs)
QX1002USB
¼" TRS connector, balanced
120 Ω balanced
+21 dBu
¼" TRS connector, balanced
120 Ω
+21 dBu
¼" TRS connector, unbalanced
+21 dBu / 22 Ω (+25 dBm)
RCA connector, unbalanced
1 kΩ
+21 dBu
-105 dB / -108 dB A-weighted
-93 dB / -96 dB A-weighted
-83 dB / -85 dB A-weighted
KLARK TEKNIK
24-bit Sigma Delta
40 kHz
120 V~, 60 Hz
MXUL6
230 - 240 V~, 50 Hz
MXSAA6
230 V~, 50 Hz
MXUK6 / MXEU6
220 V~, 50 Hz / 220 V~, 60 Hz
MXCCC6 / MXKR6
100 V~, 50/60 Hz
MXJP6
2 x 14.8 V~, 2 x 500 mA
Type B
48 kHz
50 x 195 x 248 mm
(2.0 x 7.7 x 9.8")
1.1 kg (2.4 lbs)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xenyx qx1002usb

Tabla de contenido