Fixed Closure Safety Guards; Movable Closure Safety Guards; Authorized Use - Sistem-Air BASIC LT 80 Manual Tecnico

5.2 Fixed closure safety guards

The access to the electric parts is protected by a cover which can only be removed by unscrewing the
Torsen screws used to fi x the soundproofi ng dome of the housing where the suction motors are assembled.
Every intervention on the control board and on the motors must be carried out by qualifi ed personnel only
after disconnecting the electrical power supply and by removing the electric plug from the electric inlet.

5.3 Movable closure safety guards

There are no movable closure guards assembled on the appliance. Every guard assembled is consid-
ered a fi xed guard and is fastened with special screws.
TECNOPLUS s.r.l. reminds you that it is absolutely forbidden to replace the screws used to design and
manufacture the appliances with screws that feature different characteristics.
TECNOPLUS s.r.l. will immediately suspend the product guarantee in case of machine tampering car-
ried out by the Customer.

6 - AUTHORIZED USE

The Industrial Clean Basic dust separator has been designed exclusively to vacuum clean dust, very
small size solids and dry materials.
The use of the dust separator is authorized in industrial contexts through connection to a wall-traced
pipe network and to a standard home electrical wiring.
The Industrial Clean LT 80 e LT 160 dust separators have to be used combined with one or more
blowing motors in installations planned to support an air fl ow up to 700 m
version and up to 1200 m
These components are used in installations presenting the following characteristics
- Mounting column measuring 63/80 mm (for the LT 80 version), or 63/80/100 mm (for the LT 160 ver-
sion), based on the confi guration chosen.
- Dust inlet measuring 80 mm (LT 80) or 100 mm (LT 160).
- Possibility for up to 4 contemporary users to use the installation for the LT 80, or up to 8 contemporary
users for the LT 160 model.
MODEL
BASIC
LT 80
BASIC
LT160
06/06/2016 Rev:2.0.0
3
/h for the LT 160 version.
OPERATOR Ø flexible hose 32
3
/h for the basic LT 80
OPERATOR Ø flexible hose 40
2
7