HAMPTON BAY THD90070.2a.ST Guía De Uso Y Cuidado página 11

Ensamblaje (continuación)
To adjust the vertical height.
Loosen the four screws "A" on both hinges.
Two of them are usually in slotted holes which
mean and you can adjust up or down by a few
mm. Then tighten back up
To adjust depth.
Loosen screw "B" and adjust door, if the door
can not be adjusted, please loosen screw "C",
then try again.
Tighten screw "B" and "C".
To adjust side ways.
Turning the screw "C" on BOTH hinges on
each door.
11
HAMPTONBAY.COM
Póngase en contacto con el 1-855-HD-HAMPTON para asistencia adicional.