Safety And General Information; Product Description - Pro-Lift PREMIUM T-5500 Instrucciones De Funcionamiento Y Manual De Piezas

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this
lift. The owner and operator of this equipment shall have an understanding of this lift and it's safe operating pro-
cedures before attempting to use. The owner and operator shall be aware that use and repair of this product may
require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native
language before use of this lift is authorized. If any doubt exists as to the safe and proper use of this lift, remove from
service immediately. Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any
lift that appears damaged in any way, or operates abnormally shall be removed from service immediately. If the lift
has been or is suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it),
immediately discontinue use until it has been examined by a Pro-Lift authorized service center. It is recommended
that an annual inspection be done by qualified personnel. Labels and Operator's Manuals are available from the
manufacturer (see Replacement Parts, pg. 6).

PRODUCT DESCRIPTION

The Pro-Lift Lawn Mower Lift is specifically designed to lift and support, up to rated capacity, loads consisting of
a single riding lawn mower whose frame is compatible with the lifting platform. Incompatibility is evident when the
loaded mower wobbles, feels unstable, and/or does not sit securely on the lift platform. This product is NOT suit-
able for lifting, leveling and/or positioning automobiles, trucks, SUV's or conveyances other than those specifically
listed and approved above. This product is NOT suitable for lifting, leveling and/or positioning houses, construction
trailers and dwellings in general. This product does not contain independent lifting devices, but is designed to be
permanently assembled. The Hydraulic Unit is not to be used independently of the lift.
SPECIFICATIONS
Base Size (L x W)
53-1/2" x 17"
Wheel Bracket
Height
Locking Lever
Height Unlocking
Lift Surface Capacity
Platform
Wheel Bracket
Lift Platform
Lever
Locking Swivel Casters
Figure 1 - Model T-5500 Nomenclature
Compatible Wheel Track
750 lbs.
500 lbs. 55-1/2" outside span
Crosshead
Assembly
Positioning
Handle Pin
2
Min. Height
N/A
4-1/2"
Ram
Oil Filler
Plug
Max. Height
31"
27"
Release Knob
Lift Pedal
Sleeve
Hydraulic Unit