Cleaning, Maintenance And Transportation Of Your Cooler; Internal Cleaning - Imbera IMB 250 CPY Manual De Usuario

SECTION 5
CLEANING, MAINTENANCE AND TRANSPORTATION OF YOUR
COOLER
CLEANING
Cleaning of your product consists of two stages, namely internal
cleaning and external cleaning.
Always follow the warnings below before starting the cleaning oper-
ation.
WARNING!
• Always unplug your cooler before any cleaning operation.
• Always wear protective gloves during cleaning and maintenance.
This will protect you against injuries.
• Never use domestic cleaning agents and abrasive - scratching ma-
terial to clean (flammable, ignitable and abrasive naterials such as sur-
face cleaners, detergents, fuel oil, thinner, acids, etc.). Otherwise, dis-
colouration may occur on the plastic parts of the product.
CLEANING AND MAINTENANCE
1. For efficiency of your deep freeze, perform cleaning and mainte-
nance at least once in a year.
2. Unplug your cooler from mains power before cleaning it.
3. Always wear protective gloves during cleaning and maintenance.
This will protect you against injuries.
4.Do not use domestic cleaning agents and abrasive - scratching ma-
terials to clean. Never use flowing or pressured water to wash.
5. Never wash inside or outside of your appliance. This may give
damage to your appliance or cause electric shock.
MAINTENANCE
The appliance does not require periodic maintenance.

Internal Cleaning

• Place the products inside your cooler to a cool environment where
they shall retain their temperatures.
• İBefore performing internal cleaning, wait until the temperature of
the inner parts of the appliance increases up to the ambient tempera-
30