NuWave Brio 4.5Q El Manual Del Propietario página 12

QUICKSTART
DELAY
Set your temp and time. Press DELAY and press - or + to adjust
Delay time. Adjustable up to 24 hours. After setting cooking function
and Delay time, press START/PAUSE. Press DELAY at any time to
cancel Delay.
STAGE
Stage cooking is used to cook foods at different temperatures and
times throughout the cooking process. Up to 5 stages can be set. To
add a cooking stage, press STAGE once and adjust by pressing - or +.
WATTS
Controls the power consumption of your Brio. The default wattage on
the Brio is 1500W. The lower wattage will consume less energy, ideal
if your home does not take 1500 watts. Press WATTS to adjust from
1500W to 600W to 900W.
Before Use:
1. Remove all the packaging materials.
2. Clean the Base Tray and Fry Pan Basket with Fry Pan Basket Net
thoroughly with hot water, a nonabrasive sponge, and mild dish
detergent, or in the dishwasher, top rack only.
3. Wipe the insides and outside of the Brio with a wet cloth. Do
not immerse the Brio in water. See "Assembling the Brio" under
Assembly Guide for more information.
Note: This appliance cooks using hot air. DO NOT fill the Fry Pan
Basket or Base Tray with oil.
Operation Preparation:
1. Place the Brio on a level, even, and stable
heat-resistant surface.
2. Place the Base Tray and Fry Pan Basket in the Brio. See
"Assembling the Brio" under Assembly Guide for more.
3. Plug the Brio into a standard wall socket.
Note: Do not cover or block the vent located on the back of the Brio.
Doing so can prevent proper ventilation and will adversely affect the
cooking results.
12 12
quickstart