8) Close the door to return oven to Ready Mode. If STOP is
pressed during the programming process, the oven will enter
Door Open Mode, and any program not saved will be lost.
If there is program saved as memory procedure, press the
related number button to start the programmed operation.
If nothing has been saved, the buzzer will sound and the
oven will not operate.
Example:
Program: Power level PL7, cooking time 1 minute and
25 seconds.
Step 1: In waiting stage, press number button 1 for
Step 2: Press number 3. Program will be saved in 3.
Step 3: Press numbers 1, 2 and 5 to program the
Step 4: Press Med-Hi 70% button. PL7 is displayed.
Step 5: Press START to save. When using the program next
Note:
1. If the electricity is cut off, the saved program will not be lost.
2. If the program needs to be reset, repeat the above steps.
3. If STOP is pressed instead of START at the last step, the
oven will go into Door Open Mode, and the program setting
will not be saved.
DOUBLE QUANTITY COOKING
Allows the user to double the set cooking time of a particular
food item.
1) In the Ready mode, press the X2 key before or after pressing
the desired preprogrammed key. LED displays doub.
2) If you wish to change the Cooking Factor, see Programming
Mode.
3) The oven will begin to cook.
4) At the end of the cooking program, the oven will enter End
of Cook Cycle Mode.
5 seconds. ProG is displayed.
cooking time.
time, just press 3, and the saved program will start.
15