Reviewing Blood Glucose Day Average Results - NURSE ROSIE RealTime Manual Del Propietário

Reviewing Blood Glucose Day Average Results

2. Press M to review 14-, 21-, 28-, 60- and 90- day average results stored
in each measuring mode in the order of Gen, AC, then PC.
3. Exit the meter memory. Keep pressing M and the meter will turn off
after displaying the last test result.
NOTE:
• Any time you wish to exit the memory, hold
idle for 3 minutes. The meter will turn off automatically.
• Control solution results are NOT included in the day average.
• If using the meter for the first time, "- - -" displays when you recall the test
results or review the average result. It indicates that there is no test result in
the memory.
28
1. Press and release M
When " " appears on the display,
keep pressing M for 3 seconds until the
flashing "
M and then your 7-day average result
measured in general mode will appear on
the display.
(114 mg/dL = 6.3 mmol/L)
M
for 5 seconds or leave the meter
" appears. Release