Included Items - 1byone 471UK-0010 Manual De Instrucciones

Included Items

EN
Before installing the turntable, check the package contents to ensure all parts below
DE
are included and free of visible damage. Please retain the original packaging materials
for exchange or return purposes.
FR
1 x Turntable Unit
ES
2 x Speakers
IT
1 x Turntable Lid
1 x Slip Mat
1 x Turntable Platter
1 x Tonearm Counterweight
1 x Anti-skating Weight
1 x 45 RPM Adapter
Installing the Turntable
• Mount the product on a level surface.
• To avoid the effects of vibrations and acoustic pressure, do not mount the product
next to such items as speakers.
• The product may pick up radio static if placed next to a radio. Therefore, try to keep
the product away from radios.
• If the product is near equipment (cell phone, etc.) that emits strong radio waves,
noise may occur.
Installing the Lid
Insert the hinge pockets of the lid onto the hinges of
the turntable.
1 x Drive Belt
1 x Sub-platter
1 x Belt Hook
1 x Power Adapter
1 x USB Cable for PC Link
2 x Audio Cables for Speakers
1 x Cartridge Alignment Protractor
1 x Instruction Manual
4
Turntable Platter and Belt Setup
1. Remove the protective packaging and ensure the turntable is placed on a sturdy
and level surface.
2. Insert the sub-platter into the turntable spindle located in the middle of the
turntable.
3. Loop the drive belt around the sub-platter and motor pulley (brass-colored).
4. Carefully place the main platter onto the sub-platter (Figure 1).
Figure 1
Rotating the Platter
1. Using your hands, slowly rotate the
platter ten times in the direction of the
arrow (Figure 1).
2. This step is for resetting the auto
mechanism, getting rid of any twists in
the belt and making sure the belt rides
smoothly along the drive rim on the
underside of the platter.
3. Place the slip mat on top of the platter.
Make sure the 1byone logo on the mat
is facing up (Figure 2).
Figure 1
Figure 2
5
EN
DE
FR
ES
IT