Install The Spray Gun Holder; Install The Power Cord Storage Arm; Install The Upper Handle; Install The Wheels - GreenWorks Tools GPW 1803 Manual Del Operador

EN
3.5 INSTALL THE SPRAY GUN
HOLDER
1. Aligh the screw sleeves of the spray gun holder (17) with
the screw holes on the upper handle.
2. Push the screws through the screw sleeves and tighten
them.
3.6 INSTALL THE POWER CORD
STORAGE ARM
1. Attach the power cord storage arm (16) onto the fixture.
2. Align the screw with the hole in the power cord storage
arm (16).
3. Push the screw through and tighten it.
English
3.7

INSTALL THE UPPER HANDLE

1. Push and hold the handle lock button (18) on the upper
handle (23).
2. Move the upper handle (23) into the lower handle (24)
until the handle lock button (18) clicks through the slot
(19).
3.8

INSTALL THE WHEELS

1. Put an axle (14) through the wheel and handle frame.
2. Attach a washer (13) to the axle (14).
3. Put a cotter pin (12) through the hole of the axle (14).
3.9

INSTALL THE SPRAY WAND

1. Push the end of the spray wand (2) into the gun handle
(1).
2. Turn the spray wand (2) clockwise until the tabs lock into
position.
8