System Requirements; Driver Installation - i-tec C31TRAVELEASYDOCKPD Manual De Instrucciones

DESCRIPTION
1x integrated USB-C cable for
1.
connecting to a device (18 cm)
1x SD / microSD card reader
2.
USB-C PD port (for charging only)
3.
1x USB 3.0 port (5Gbps)
4.
1x USB 2.0 port
5.
LED indication
6.
1x HDMI port
7.

SYSTEM REQUIREMENTS

Hardware requirements: laptop, tablet, smartphone running Windows,
macOS X, ChromeOS, or Linux with USB-C interface and „DisplayPort
Alternate Mode" and „Power Delivery" support (not all devices / systems
with USB-C interface support this as standard) or Thunderbolt 3/
Thunderbolt 4 port
Operating system: Windows 8/10 32/64bit, macOS X, Google ChromeOS,
Linux and Android 6 and higher with latest updates

DRIVER INSTALLATION

Windows 10 32/64bit: After connection, the drivers for the docking
station are installed automatically on the system. Before installation
make sure that your system has installed the latest drivers for your
device and updated BIOS.
macOS X: Installation of the drivers in macOS X is automatic. Before
installation make sure that your Mac has installed the latest OS for your
device.
CONNECTING A HDMI MONITOR
The docking station is equipped with 1x HDMI 4K Ultra HD port for the
connection of an external monitor or beamer with a HDMI interface. For
displaying your images you can use a modern plazma or LCD monitors
and TVs. The graphic chip, which is the heart of the docking station,
supports up to 4K resolution 3840x2160/30Hz. Connect the monitor to
the docking station using a highquality HDMI cable. During installation
of an additional monitor the screen of the notebook or tablet can flicker
which is a standard condition.
CONNECTING TO THE LAN
You can use the GLAN RJ-45 port for connecting the Ethernet to a router/
switch and to the internet, it supports speeds of 10 / 100 / 1000 Mbps.
Quick Start
| 7
ENGLISH