Emission Control System Warranty; Warranty Coverage; Specifications; Tuneup Specifications - Honda GXV160 Manual Del Propietário

EMISSION CONTROL SYSTEM WARRANTY

Your Honda Power Equipment engine is designed, built, and equipped to
meet the U.S. EPA, Environment Canada, and California Air Resources
Board (models certified for sale in California only) emission standard for
spark ignited engines. American Honda Motor provides the emission
warranty coverage for engines in the United States and its territories.
Honda Canada provides the emission warranty for engines in the 13
provinces and territories of Canada.

Warranty Coverage

Honda Power Equipment engines certified to the U.S. EPA, Environment
Canada, and State of California (models certified for sale in California
only) emission regulations are covered by this warranty to be free from
defects in materials and workmanship that may keep it from meeting the
applicable U.S. EPA , CARB and Canadian emissions requirements for a
minimum of 2 years or the length of the Honda Power Equipment
Distributor's Limited Warranty, whichever is longer, from the original date
of delivery to the retail purchaser. This warranty is transferable to each
subsequent purchaser for the duration of the warranty period. Warranty
repairs will be made without charge for diagnosis, parts, and labor.
Information about how to make a warranty claim, as well as a description
of how a claim can be made and/or how service can be provided, can be
obtained by contacting an authorized Honda Power Equipment dealer or
by contacting the following:
American Honda
Email: powerequipmentemissions@ahm.honda.com
Telephone: (888) 888-3139
Honda Canada
Telephone: (888) 946-6329
The covered components include all components whose failure would
increase an engine's emissions of any regulated pollutant or evaporative
emissions. A list of specific components can be found in the separately
included emissions warranty statement.
Specific warranty terms, coverage, limitations, and manner of seeking
warranty service are also set forth in the separately included emissions
warranty statement. In addition, the emission warranty statement can
also be found on the Honda Power equipment website or at the
following link:
http://powerequipment.honda.com/support/warranty
16

Specifications

GXV160 (PTO shaft type N1)
Length×Width×Height
Dry mass [weight]
Engine type
Displacement
[Bore×Stroke]
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation

Tuneup Specifications

ITEM
Spark plug gap 0.70–0.80 mm
(0.028–0.031 in)
Idle speed
1,700±150 min
Valve clearance IN: 0.15±0.02 mm
(cold) EX: 0.20±0.02 mm
Other specifications
ENGLISH
420×365×357 mm
(16.5×14.4×14.1 in)
15.1 kg (33.3 lbs)
4-stroke, overhead valve, single cylinder
3
163 cm (9.9 cu-in)
[68.0×45.0 mm (2.68×1.77 in)]
0.65 L (23 oz, 0.57 lmp qt)
1.4 L (0.37 US gal, 0.31 lmp gal)
Forced air
Transistor magneto
Counterclockwise
SPECIFICATION MAINTENANCE
Refer to page: 10
-1 Refer to shop
(rpm)
manual
See your
authorized
Honda dealer
No other adjustments needed.