Operation
Signal information
Default display mode: Specifies
which information should be
GB
displayed by default when the signal
information is shown.
Basic: displays only the signal
information window,
Transponder: displays the
signal information window and a
transponder information window,
Stream: displays the signal
information window and a stream
information window,
AC-3: displays the signal information
window and a AC-3 stream
information window
Position: Position of the signal
information window in the OSD
Height: Height of the signal
information window in pixels
Horizontal Offset: Horizontal
positioning of the signal information
window
Use SVDRP service: Permits other
local plug-ins easy access to an
SVDRP server.
32
Streaming Client
The ReelBox can be configured here
for use as streaming client.
Start Client: Activates the client
software on the ReelBox
Remote IP: IP address of the
streaming server
Remote Port: Port number of the
streaming server
Filter Streaming: Activate filter for
streaming server
Synchronize EPG: Update EPG
Multifeed options
Portal Mode: Determine whether
the overview channel in a
multi-feed channel bundle should
have a number. Yes should be set
here so that the overview channel is
not numbered. Otherwise there may
be problems for instance in the
Premiere Sport Portal.
If No is entered, the overview
channel is numbered as well.
Display info on channel change:
Specifies whether a channel
information window should be
displayed within the multi-feed
menu during switch-over (yes, no).
Display EPG information: Specifies
whether information on the EPG
should be displayed in multi-feed
mode.
Show plugin again on button:
Specify button allotment multi-feed
display.
Swap up and down: Reverse button
allotment in multi-feed mode.
Show old director OSD: Specifies
whether a different multi-feed
window should be displayed.